Installation and Setup Guide for Your New System

With the power buttons on the components in the OFF position, plug-in components to the wall. With multiple components it may be necessary to use a power strip with multiple AC outlets. Turn on the receiver at low volume, select AM or FM and check to ensure that sound is coming from both speakers. If you have left and right channel sound, put a disc in the CD player, select CD on the receiver’s source selector and listen for sound. Do the same with the DVD player. If you have no sound from any source, turn off the system and re-check all connections, including speakers. Re-try the system again. If you still have no sound, refer to the Troubleshooting section on this site.

• Place Stereo Speakers and Audio Components
• Connect Stereo Speakers to Receiver or Amplifier
• Connect Digital Output(s) of Source Components to Receiver or Amplifier
• Connect Analog Inputs/Outputs of Source Components to Receiver or Amplifier
• Attach AM and FM Antennas to Appropriate Terminals on Receiver
• Plug In Components, Turn-On Power and Test System at Low Volume